CALYPSO
Electromechanical 230Vac
230Vac irreversible electromechanical operator for swing gates with leaves up to 3m long.
-
Only version for right and left leaf
-
Wear-proof gears for a heavy-duty motor
-
Practical unlocking system, easy to activate even with one hand.
-
Protected position of the power cable.
Composed by:
-
Actuator CA53 (1pc).
-
LIVE PANEL M101 (1 unit)
-
IRO2 emitters (2 units).
-
IRRE2-250 receiver (1 unit).
-
Photocell FT06 (1 unit) or FT02 1 unit)
Composed by:
-
Actuator CA43 (2ud).
-
LIVE PANEL M201 (1 unit)
-
IRO2 emitters (2 units).
-
IRRE2-250 receiver (1 unit).
-
Photocell FT06 (1 unit) or FT02 1 unit)
BUL
Electromechanical 24Vdc
For all types of swing doors with a maximum leaf length of 3.5 meters.
-
Intelligent: Actuator with self-learning capacity. It learns the door travels, slowdown spaces and slowdown speeds.
-
Easy installation.
-
Silent.
AXIL
Electromechanical 230 Vac_ 24 Vdc
-
230Vac and 24 Vdc irreversible electromechanical operator for swing gates with leaves up to 2.8 m long
-
Personalized key to access the unlocking mechanism (with your own key).
-
All the models in the Axil range are equipped with mechanical opening stops.
-
Practical compartment for electrical connections.
Composed by:
-
Actuator VUA31 (1pc).
-
LIVE PANEL M101 (1 unit)
-
IRO2 emitters (2 units).
-
IRRE2-250 receiver (1 unit).
-
Photocell FT06 (1 unit) or FT02 1 unit).
-
High electro lock sec. CISA.
VULCAN D
residential hydraulic
Linear hydraulic actuator for swing gates up to 2.5m
-
Actuators not locked/locked.
-
stem 265mm
-
residential use
-
Recommended for light doors
VULCAN
Hydraulic 230Vac
For all types of swing doors with a maximum leaf length of 6 meters.
-
Full range. Reversible and locked actuators, with 265mm and 400mm stems, several different opening speeds.
-
Intensive use. Actuators specially indicated for access doors to areas with a large influx of vehicles.
-
Easy connection. It has removable terminals both in the actuator and in the panel, to facilitate the connection of the actuator to the control panel.
-
Easy assembly. New adjustable support that saves a lot of time in the assembly of hydraulic actuators.
-
High power. Operators especially indicated for light and very heavy doors.
Composed by:
-
Actuator VUA31 (2ud).
-
LIVE PANEL M201 (1 unit)
-
IRO2 emitters (2 units).
-
IRRE2-250 receiver (1 unit).
-
Photocell FT06 (1 unit) or FT02 1 unit).
-
High electro lock sec. CISA.
Additional security accessories:
-Photocells.
-Electromechanical safety band.
-Sliding door stop.
-Lamp flashing to warn of door in manoeuvre.
-Traffic lights.
.jpg)
VULCAN S
Hydraulic 230Vac
For all types of swing gates with a maximum leaf length of 6 meters
Actuators equipped with an anti-crushing system that allows compliance with the EN-UNE-12453 standard, without the need for safety elements placed on the doors.
CYCLONE
Electromechanical 230Vac
For all types of swing gates with a maximum length
sheet of 2.5 meters.
-
Smart: Learns gate travel, slowdown spaces, and slowdown speeds.
-
Safety: Anti-entrapment system.
-
Residential doors: Highly recommended for small residential doors.
-
Easy installation: Installation with both articulated and sliding arm.
-
It can be installed in very small spaces, where there is not much room to install other actuators, and on doors with wide pillars.
MAGIC
Electromecanico 230Vac
_cc781905-5cde-3194-iron swing doors For all residential type bb3b-136bad5cf
_cc781905-5cde-3194-bb3b-136bad5cf58dmax.
-
Airtight. The hermetic nature of the installation guarantees complete sealing against external agents: water, dirt, saline environments, etc.
-
Improved aesthetics. The original forms of the door remain intact, as none of the mechanical elements are visible.
-
Easy assembly. Simple assembly and easy maintenance, which guarantees continuous, quality use and significant savings in installation costs.
-
No limits regarding the degree of opening. With anti-entrapment security system.
ARC
Electromechanical 24Vdc
Actuator especially indicated for wide pillars
-
Smart: self-learning actuator (learns the door travels, slowdown spaces and slowdown speeds)
-
Safety: anti-entrapment system
-
Easy installation with articulated arm
-
Silent
MOLE
Electromechanical 24Vdc
Para todo tipo de puertas batientes con una longitud máxima de sheet of 3.5 meters. Small in size, resistant to water, strong and very reliable for any type of door.
-
Intelligent. Actuator with self-learning capacity. Learn the gate paths, slowdown spaces, and slowdown speeds.
-
Great power.
-
Security. Anti-entrapment system.
MOLE 230Vac
Underground electromechanical operator for swing gates
-
For swing gates up to 3m per leaf
-
Mounting holes allow the Mole to be installed inside many existing foundation box models
SMARTY 5R
The ROGER SMARTY 5 R reversible motor for single-leaf swing gates up to 5 meters is ideal for use in low-voltage super-intensive installations, so it can be running all day without stopping. Electromechanical motor suitable for installation in communities of owners. For leaves of more than 2.5 meters in length, it is recommended to use an electric lock. Pre-installation for absolute encoder. It has an adjustable mechanical limit switch. Made of an aluminum base treated with anticorrosive paint. With release lever and ease of handling in the lock. You can buy an emergency battery in our product catalog that acts in case of loss of electrical current. Download the instruction manuals to carry out a correct configuration and installation of the motor and the 36 V EDGE control panel. THE KIT INCLUDES:
-
1 x SMARTY 5 R reversible electromechanical motor.
-
1 x EDGE control panel for Roger Brushless motors
ROGER BR20/400/R Motor Kit for swing gates up to 4 meters and 1 leaf. Reversible
ROGER TECHNOLOGY Motors for swing gates have been designed with a unique design and have been studied according to the capacity and length of the different types of Gates. The RB20 series covers a range of gates up to 4 m in length.
BRUSHLESS electromechanical gearmotor, low voltage, extra intensive use with integrated internal encoder 36, reversible, for swing gates up to 4 m with adjustable mechanical stops
in opening and closing.
- Reversible (No Lock)
- Brushless technology
- For leaves up to 4 meters.
THIS KIT INCLUDES:
- ROGER BR20/400/R engine
- ROGER H93/RX20/I plug-in receiver
- ROGER EDGE1/BOX control panel for 1 or 2 motors
- 2 ROGER E80/TX52R/2 controls
BE20/400
Irreversible electromechanical BRUSHLESS gear motor, low voltage, intensive use, integrated internal encoder, for swing gates with a maximum leaf of 4 m, with opening and closing mechanical stop.
Line power: 230V AC - 50Hz
Engine supply: 36V
Rated power: 200W
Frequency of use: Heavy use
Thrust: 100 - 2800N
Operating temperature: -20 C° +55 C°
Degree of protection: IP44
Engine Type: Irreversible
Speed: 1.66cm/s
Opening time: 17-26 s
Travel: 550mm
Limit switch: Mechanical stop in opening and closing
Recommended digital controllers: 230V: EDGE1/BOX - 115V: EDGE1/BOX/115
Encoder: Internal 48 PPR SENSORLESS digital encoder
Operation cycles per day (opening/closing – 24 hours without stopping): 1000
Maximum product dimensions (L x W x H): 1019 x 105 x 155
