Embed from a sheet. TESA.
EN 1125 certificate for the two sets 1970 + CF60 and 1970 + 2035T/ 4039T/ 2037F.
Horizontal oval bar 900 mm long
main support y auxiliary support
Mounting instructions and installation template:
Bar with NUECA 8 mm:
Double square drive 8-8 / 8-8 bolted.
Bar with NUECA 9 mm:
Double square drive 9-9 / 9-9 bolted.
Embed double sheet. (TESA)
Certificate EN 1125 of the set 1970 + CF32.
active sheet
Use a 1970 bar + CF60 lock + external drive.
idle sheet
1. Bar
2. Counter lock
CF32. Ref. CF320SR9Z. Reversible. 9mm square.
Both in the upper part and in the lower part it has threaded housings
to hold the bolts.
3. Bar lock
Or espagnolette retainer. Ref. RETFACF32. It is placed inside the door
for the high closing point. Operation: by activating the anti-panic device, the bolts come out of their housing and are retained by this element. When the door closes, the Ref. RETFACF32 element hits the frame, releasing the movement of the espagnolettes and allowing the door to close.
4. Espagnolettes (lower and upper).
Ref. BARVECF32. At one end they end in a bolt for the locking points and at the other they are threaded to allow the union with the CF32 counterlock. This reference also includes the floor striker.
Lock for panic bar
TESA's fire locks are manufactured to offer
maximum resistance in case of fire and constitute a defense
effective against fire: equip RF doors that prevent the transmission
of fumes and gases, they do not allow flames or heat to pass through, they prevent
inflammations on the face not exposed to fire....
Disabled device. stainless steel (TESA)
Rim device with 1/2 closing points
with double horizontal bar.
Steel latch, tilting. Outside drive.
Certification EN 1125:
3 7 6 B 1 3 2_cc781905- 5cde-3194-bb3b-136bad5cf58d_2 A A
» 2 main and 2 secondary supports.
» 2 900mm oval horizontal bars.
» 1(2) 930 mm espagnolettes.
» (2 forwards for High/Low closing points).
Universal Series (TESA
CISA FAST TOUCH PANIC ANTI-PANIC840mm SIDE CLOSURE
Painted aluminum box, painted aluminum bar, adaptable to mortise locks.
black finish.
910 Overlay (TESA)
Rim device with a lateral closing point. Steel latch, tilting.
Outside drive.
» 1 main and secondary support.
» 1 900mm oval horizontal bar.
1920 Overlay.
Rim device with two locking points, high and low, bolt.
Outside drive.
» 1 main and secondary support.
» 1 900mm oval horizontal bar.
» 2 espagnolettes of 930 mm.
» 2 forwards for high and low closing points.
1930 Overlay Stainless Steel (TESA)
Rim device with two closing points, high and low.
Steel latches, tilting.Standard height: 2210mm.
Outside drive.
» 1 main and secondary support.
» 1 900mm oval horizontal bar.
» 2 espagnolettes of 930 mm.
» 1 bag of accessories with strikers -high and low-, square, fastening screws
and two espagnolette guides.
» Instruction sheets and installation template.
» 2 forwards for high and low closing points.
1950 Overlay (TESA)
Rim device with three locking points,
high, low -vertical- and central -lateral-.
Steel latches, tilting.
Standard height: 2210mm. Outside drive.
Certification EN 1125:
3 7 6 B 1 3 2_cc781905- 5cde-3194-bb3b-136bad5cf58d_2 A A
» 1 main and secondary support.
» 1 900mm oval horizontal bar.
» 2 espagnolettes of 930 mm.
» 2 forwards for high and low closing points.
195 L Rim (TESA)
Rim device with three lateral points
closing, high, low and central.
Steel latches, tilting.
Standard height: 2210mm. Outside drive.
Certification EN 1125:
3 7 6 B 1 3 2_cc781905- 5cde-3194-bb3b-136bad5cf58d_2 A A
» 1 main and secondary support.
» 1 900mm oval horizontal bar.
» 2 espagnolettes of 930 mm.
» 2 forwards for high and low closing points.
