Resultados de la búsqueda

Automatización y mantenimiento de puertas de Garaje. Motores con tecnología brushless. Marca ROGER. motores de uso intesivo y silenciosos de alto rendimiento. BRUSHLESS motors Advantages, disadvantages and applications The motors have the characteristic that they do not use brushes in the commutation for the transfer of energy; in this case, the switching is done electronically. This property eliminates the great problem that conventional electric motors with brushes have, which produce friction, reduce performance, give off heat, are noisy and require periodic replacement and, therefore, greater maintenance. Brushless motors have many advantages over brushed DC motors and over induction motors. Some of these are: higher speed-torque ratio higher dynamic response greater efficiency longer shelf life less noise increased speed range ROGER motors for door automation. ROGER 600Kg BH30/600 HS Brushless motor kit for sliding gates. Extremely strong motor, with a lot of torque but at the same time extremely small and compact, thanks to its special windings of concentrated coils and powered by a three-phase sinusoidal system. The silence or practically non-existent noise of the BRUSHLESS motor during all its movements is very surprising. The BRUSHLESS digital controller, which works at low voltage 24V/36V DC, allows the automation to be controlled 100% in digital mode. Thanks to an operation based entirely on a DSP microcontroller, the stroke and all the movements of the automation can be programmed and customized in a simple, exact and elegant way. The ROGER H30/640 HS Motor with BRUSHLESS digital technology produces perfect, elegant movements with constant force and torque at each of its points with maximum safety and always with the possibility of varying its speed, directing perfect slowing movements and acceleration. Thanks to digital technology we can detect an obstacle and reverse the motor instantly, easily defining the torque of the motor, the sensitivity, the time and the reversal stroke. Always respecting the maximum security conditions. A motor that can work at low voltage, with super-intensive use, operating in environments with very difficult climatic conditions and always maintaining extremely low consumption. Guía rápida correderas BH y BM Guía rápida H70/104AC Guía rápida B70/1DC BG30/1604 BRUSHLESS electromechanical geared motor, low voltage, extra intensive use, with integrated internal encoder, irreversible, for gates up to 1600 kg, built-in B70 series digital panel, magnetic limit switch. brushless intensive use digital encoder magnetic limit switch Door max weight: 1600 kg Line power: 230V AC - 50Hz Engine supply: 36V Rated power: 390W Frequency of use: Heavy use Thrust: 50 - 1200N Operating temperature: -20+55°C Degree of protection: IP44 Engine Type: Irreversible Speed: 12 m/min (0.20 m/s) Limit switch: Magnetic Integrated control box: B70/1DCHP Encoder: Integrated internal encoder + 4096 PPR SENSORED digital magnetic encoder Emergency battery: Optional 2 x 12V 4.5AH external batteries External Sprocket: Z17/mod 4 Operation cycles per day (opening/closing – 24 hours without stopping): 1000 Maximum product dimensions (L x W x H): 346 x 180 x 362 Guía rápida cuadro B70 1DCHP SMARTY 5R The ROGER SMARTY 5 R reversible motor for single-leaf swing gates up to 5 meters is ideal for use in low-voltage super-intensive installations, so it can be running all day without stopping. Electromechanical motor suitable for installation in communities of owners. For leaves of more than 2.5 meters in length, it is recommended to use an electric lock. Pre-installation for absolute encoder. It has an adjustable mechanical limit switch. Made of an aluminum base treated with anticorrosive paint. With release lever and ease of handling in the lock. You can buy an emergency battery in our product catalog that acts in case of loss of electrical current. Download the instruction manuals to carry out a correct configuration and installation of the motor and the 36 V EDGE control panel. THE KIT INCLUDES: 1 x SMARTY 5 R reversible electromechanical motor. 1 x EDGE control panel for Roger Brushless motors Guía rápida EDGE 1 BOX ROGER BR20/400/R Motor Kit for swing gates up to 4 meters and 1 leaf. Reversible ROGER TECHNOLOGY Motors for swing gates have been designed with a unique design and have been studied according to the capacity and length of the different types of Gates. The RB20 series covers a range of gates up to 4 m in length. BRUSHLESS electromechanical gearmotor, low voltage, extra intensive use with integrated internal encoder 36, reversible, for swing gates up to 4 m with adjustable mechanical stops in opening and closing. - Reversible (No Lock) - Brushless technology - For leaves up to 4 meters. THIS KIT INCLUDES: - ROGER BR20/400/R engine - ROGER H93/RX20/I plug-in receiver - ROGER EDGE1/BOX control panel for 1 or 2 motors - 2 ROGER E80/TX52R/2 controls GUIA RÁPIDA - MOTORES BATIENTES Manual Cuadro de control B70/2DC Guía rápida EDGE 1 BOX BE20/400 Irreversible electromechanical BRUSHLESS gear motor, low voltage, intensive use, integrated internal encoder, for swing gates with a maximum leaf of 4 m, with opening and closing mechanical stop. Line power: 230V AC - 50Hz Engine supply: 36V Rated power: 200W Frequency of use: Heavy use Thrust: 100 - 2800N Operating temperature: -20 C° +55 C° Degree of protection: IP44 Engine Type: Irreversible Speed: 1.66cm/s Opening time: 17-26 s Travel: 550mm Limit switch: Mechanical stop in opening and closing Recommended digital controllers: 230V: EDGE1/BOX - 115V: EDGE1/BOX/115 Encoder: Internal 48 PPR SENSORLESS digital encoder Operation cycles per day (opening/closing – 24 hours without stopping): 1000 Maximum product dimensions (L x W x H): 1019 x 105 x 155 Guía rápida EDGE 1 BOX BR/630 Pre-lever motor for up-and-over doors. The ROGER BR/630 ple-cam motor for overhead doors is super heavy duty and low voltage so it can run 24/7 with optimum performance at all times. Suitable for pleleva doors with maximum reach dimensions of 25 m². It is an electromechanical motor from the ROGER Brushless series, with native digital and absolute sensorless technology encoder that is sold together with the compatible control panel so that you can complete the installation of your automatic up-and-over door. You can download the instruction manuals to carry out a correct configuration and installation of the motor and the B70/1R/BOX control panel. THE KIT INCLUDES: 1 x ROGER BR/630 electromechanical engine. 1 x B70/1R/BOX control panel for Roger Brushless motors. Engine characteristics Mains power supply: 230 Vac 50/60 Hz Motor power supply: 24 V Rated Power: 150W Maneuvering speed: 15-30 revolutions per minute Maximum reach dimensions: 25 m² Protection: IP40 Operating temperature: -20 +55ºC Control panel characteristics Supply voltage: 230Vac 50Hz Motor supply: 24V Maximum power absorbed by the network: 200 W Rated motor power: 60W Maximum motor power: 150W Motor Control: Field Oriented (FOC), Sensored Maximum intermittent power: 25 W (24 Vdc) Flashing light: 50% Connected motors: Up to 1 Courtesy max lux power: 100W 230Vac - 40W 24V AC/D Max open gate light power: 3W (24V DC) Accessories max output current: 10 W (24V DC) Operating temperature: -10 +55ºC Cuadro B70 / 1R ROGER C40 kit for sectional doors. 1000Nm. Available with 3.3m and 4m guide. The Max Motion Gates series represents the Roger Technology line dedicated to motors for the automation of sectional garage doors, with a maximum area of 18 m2. The new RAIL C40 sectional garage door motor represents a simple and easy-to-install solution, thanks to its 24Vdc motor, its pure motor power of 1000 N and the different reinforced belt guides with which to handle doors with heights 2500mm or 3000mm. maximum. Kit Includes: - ROGER C40 motor with control box and receiver. - Reinforced Belt Guide of 3.3m or 4m (You must section it at the top of the screen) - 2 ROGER E80/TX52R/2 controls Guía rápida C40

Reparaciones e instalación, de Barras anti pánico. Selector de cierres. Freno retenedor justor. Cerraduras y bombillos Anti Pánico. JMiG cerrajeros. 629107555. Anti Panic Bars. Embed from a sheet. TESA. EN 1125 certificate for the two sets 1970 + CF60 and 1970 + 2035T/ 4039T/ 2037F. Horizontal oval bar 900 mm long main support y auxiliary support Mounting instructions and installation template: Bar with NUECA 8 mm: Double square drive 8-8 / 8-8 bolted. Bar with NUECA 9 mm: Double square drive 9-9 / 9-9 bolted. Embed double sheet. (TESA) Certificate EN 1125 of the set 1970 + CF32. active sheet Use a 1970 bar + CF60 lock + external drive. idle sheet 1. Bar 2. Counter lock CF32. Ref. CF320SR9Z. Reversible. 9mm square. Both in the upper part and in the lower part it has threaded housings to hold the bolts. 3. Bar lock Or espagnolette retainer. Ref. RETFACF32. It is placed inside the door for the high closing point. Operation: by activating the anti-panic device, the bolts come out of their housing and are retained by this element. When the door closes, the Ref. RETFACF32 element hits the frame, releasing the movement of the espagnolettes and allowing the door to close. 4. Espagnolettes (lower and upper). Ref. BARVECF32. At one end they end in a bolt for the locking points and at the other they are threaded to allow the union with the CF32 counterlock. This reference also includes the floor striker. Lock for panic bar TESA's fire locks are manufactured to offer maximum resistance in case of fire and constitute a defense effective against fire: equip RF doors that prevent the transmission of fumes and gases, they do not allow flames or heat to pass through, they prevent inflammations on the face not exposed to fire.... Disabled device. stainless steel (TESA) Rim device with 1/2 closing points with double horizontal bar. Steel latch, tilting. Outside drive. Certification EN 1125: 3 7 6 B 1 3 2_cc781905- 5cde-3194-bb3b-136bad5cf58d_2 A A » 2 main and 2 secondary supports. » 2 900mm oval horizontal bars. » 1(2) 930 mm espagnolettes. » (2 forwards for High/Low closing points). Universal Series (TESA CISA FAST TOUCH PANIC ANTI-PANIC 840mm SIDE CLOSURE Painted aluminum box, painted aluminum bar, adaptable to mortise locks. black finish. 910 Overlay (TESA) Rim device with a lateral closing point. Steel latch, tilting. Outside drive. » 1 main and secondary support. » 1 900mm oval horizontal bar. 1920 Overlay. Rim device with two locking points, high and low, bolt. Outside drive. » 1 main and secondary support. » 1 900mm oval horizontal bar. » 2 espagnolettes of 930 mm. » 2 forwards for high and low closing points. 1930 Overlay Stainless Steel (TESA) Rim device with two closing points, high and low. Steel latches, tilting.Standard height: 2210mm. Outside drive. » 1 main and secondary support. » 1 900mm oval horizontal bar. » 2 espagnolettes of 930 mm. » 1 bag of accessories with strikers -high and low-, square, fastening screws and two espagnolette guides. » Instruction sheets and installation template. » 2 forwards for high and low closing points. 1950 Overlay (TESA) Rim device with three locking points, high, low -vertical- and central -lateral-. Steel latches, tilting. Standard height: 2210mm. Outside drive. Certification EN 1125: 3 7 6 B 1 3 2_cc781905- 5cde-3194-bb3b-136bad5cf58d_2 A A » 1 main and secondary support. » 1 900mm oval horizontal bar. » 2 espagnolettes of 930 mm. » 2 forwards for high and low closing points. 195 L Rim (TESA) Rim device with three lateral points closing, high, low and central. Steel latches, tilting. Standard height: 2210mm. Outside drive. Certification EN 1125: 3 7 6 B 1 3 2_cc781905- 5cde-3194-bb3b-136bad5cf58d_2 A A » 1 main and secondary support. » 1 900mm oval horizontal bar. » 2 espagnolettes of 930 mm. » 2 forwards for high and low closing points. TESA catalog (pdf). Escape routes. Panics.

Reparaciones e instalaciones de cerraduras de todos los modelos. ANTI-BUMPING, Anti-tadadro. Cerraduras de seguridad y alta seguridad. JMiG cerrajeros. 629107555. mechanical locks *ANTI-BUMPING LOCKS* lynx anti bumping deadbolt bolt fac anti bumping Now FAC Seguridad, SA is launching a new lock with the same dimensions as always but with major security innovations to meet new needs. Fac Seguridad presents a new series of locks that further increases protection against theft. The new 946 RP-UVE series incorporates active floating pins, overlapping strike, anti-extraction steel plate and a new one-piece steel protective cap with a hardened disk. The new 946 RP/80 UVE bolt has been designed by the FAC R&D department and manufactured in Spain. Features new anti-crowbar, anti-drill, anti-extraction, anti-pick and anti-bumping systems. The sum of these systems enhance, even more, the security of this lock. Locks for fire doors. TESA. Lock for panic bar TESA's fire locks are manufactured to offer maximum resistance in case of fire and constitute an effective defense against fire: equip RF doors that prevent the transmission of smoke and gases, do not allow flames or heat to pass through, prevent inflammation in the face not exposed to fire. R200B / R20AB / R201B series 4 14mm diameter nickel-plated steel bolts. 3 bolts in models R101B/ R201B. Mechanism protected in a closed steel box for the R200B and R100B models. Open box with upper and lower protections in the R201B and R101B models. Mod. R200B/R201B with E700L security escutcheon. Mod. R100B/R101B with E300L security escutcheon. Available versions with fronts and strikers with rounded edges. Also available strikers with torn window. Possibility of panic function (R20AB). NOVEDAD: R200 y R201 en acabado AI. Optional anti-card latch (R200B). R20AB series TESA locks with an anti-panic function solve the two main problems that we face in entrance doors: the protection of property and the safety of people. In an emergency situation, the anti-panic function will always allow free exit from inside the home, even when we have locked it. 1 leaf doors. Entre ejes de 92 mm. 22, 27, 32, 37 and 42mm inputs. 9mm follower. Available for right and left hand doors. Available with anti-panic function Type B and C. Optionally, also available without anti-panic function. Stainless steel front and strikers (Cr18/Ni10). Closed galvanized steel box. Nickel plated latch and lever. Manufactured entirely with RF materials. Certified according to the German regulation DIN 18251. Operation with 15 mm eccentric cylinder. LOCKS 3 ANCHORAGE POINTS CR -Tower- Motura - Iseo

Instalación de bombillos normales y de alta seguridad. Todos las marcas y modelos. Reparaciones de cerraduras. Apertura de puertas. JMiG cerrajeros. 629107555. light bulbs, locks Installations and Repairs. Openings. All models. Security and High Security. Budgets without commitment. Aperturas de puertas. Cerraduras Todos los modelos. Seguridad y Alta Seguridad. Presupuestos sin compromiso. mastering of light bulbs Mastering of light bulbs for door of community portals. You do not need to change the keys of the neighbors. We master the bulb so that all the keys continue to be valid. Multiple mastering is when the same bowler can be opened with different keys. Alta Segurldad T10P (TESA) T10P cylinders are equipped with the most advanced protection systems: spring-loaded pins. Features » Type of key: Flat, reversible and narrow neck. » 5 nickel silver keys per cylinder. » Number of rows: 2 » Pkt#; 6+5 » Combinatorial: Grade 6 » Corrosion and temperature resistance: Grade B » Anti-pick pins » Anti-bump system » Drill protection Options » Finishes: brass or nickel. » Cams: R15 and R13. » Masterkeying. Only extensions available » Possibility of matching and matching cylinders to a key number. master keying It is a planned locking system in which a key opens more than one cylinder, whether it has its own key or not. For offices, homes and companies of different sizes, master keying is the immediate solution that allows establishing access control, as well as reducing the number of keys to handle: security and comfort. It is convenient that the master keying is simplified to the maximum, since the more complex we will lose the possibility of carrying out later extensions. TK100 high security cylinder TK100 - high security cylinder. Reversible point wrench with 10 pins. This cylinder incorporates a Protection against fraudulent key copies. It is necessary to present property card to request copies.Anti-drill, anti-bump, anti-extraction and anti-pick protection. Superior to the rest of the TESA cylinder range. TX80 cylinder. TESA high security cylinder. High security cylinder. With reversible point key and 8 pins. Protection against fraudulent key copies. It is necessary to present a property card to request copies.Protections anti-drill, anti-bump, anti-extraction and anti-pick . Modular Mul-T-Lock Cylinder MODULAR EURO Modular Mul-T-Lock Cylinder MODULAR EURO Cylindrical high security lock Modular Cylinder equipment is based on "single cylinder" lengths of "31","33" or "35". A wide assortment of parts will allow you to build any "side" from as little as 31mm. Up to 80mm. T10P (TESA) T10P cylinders are equipped with the most advanced protection systems: spring-loaded pins. Features » Type of key: Flat, reversible and narrow neck. » 5 nickel silver keys per cylinder. » Number of rows: 2 » Pkt#; 6+5 » Combinatorial: Grade 6 » Corrosion and temperature resistance: Grade B » Anti-pick pins » Anti-bump system » Drill protection Options » Finishes: brass or nickel. » Cams: R15 and R13. » Masterkeying. Only extensions available » Possibility of matching and matching cylinders to a key number. master keying It is a planned locking system in which a key opens more than one cylinder, whether it has its own key or not. For offices, homes and companies of different sizes, master keying is the immediate solution that allows establishing access control, as well as reducing the number of keys to handle: security and comfort. It is convenient that the master keying is simplified to the maximum, since the more complex we will lose the possibility of carrying out later extensions. T60 (TESA) TE 6 (TESA) The TE6 is a cylinder designed to cover master keying that the TE5 is not capable of solving. It is a more complete cylinder that, in addition to having a greater degree of combination, offers a greater degree of passive safety. Characteristic » Type of key: Nickel-plated brass toothed. » Number of rows : 1 » Number of pins: 6 » Technology: Tumbler. » Combinatorial: Grade 6 » Masterkeying: Medium capacity » Resistance to corrosion and temperature: Grade B » Medium protection against picking. » Drill protection » Antibump Protection » Endurance: 50,000 cycles. » 3 keys per cylinder. Options » Finishes: brass or nickel. » Cams: R15 and R13. » Possibility of master keying, matching and cylinders to a specific code. » Wide range of sizes and profiles. master keying The TE6, in addition to combining 10 heights per station, has a multi-profile system that triples its possibilities in a closing plan. Multi-profile system refers to the combination of different grooves to increase the possibilities of combination. The TE6 currently uses three flutes (KT1-3-5) to obtain single keys. Later, there is an additional compatible with all of them, the master groove. For all these reasons, the TE6 enjoys three stars in the master key capabilities table. Being the alternative to TE5 in those cases in which the required project is demanding but must take maximum care of the price factor. T80 (TESA) Reversible flat key model with exceptional combination capabilities. Gracias a las dos filas de pitones cargados a muelle ya la posibilidad de utilizar side pins. Features » Type of key: Flat reversible. » Number of rows : 2 » Number of pins: 8 double diameter. » Technology: Conventional Tumbler. » Combinatorial: Grade 6 » Masterkeying: Medium capacity. » Resistance to corrosion and temperature: Grade B » Anti-bump system. » Medium protection against picking. » Drill protection. » Endurance: 100,000 cycles. » 5 nickel silver keys per cylinder. Options » Double safety clutch. » Modular system (for unusual measures or reinforcement of the bridge) » Brass and nickel finishes. » Cams: R15, R13 and sprockets. » Possibility of master keying, equalization and specific codes. » Wide range of sizes and profiles. master keying The T80 is an ideal system for master key systems where the number of different key functions is large (more than 100 different key functions). It is an ideal system for residential master key systems, since the second row of pins keeps the security related to the key intact. Tesa TE 5 brass button cylinder European profile. Panic cylinder. Indicated for doors of pressure rooms, boilers, machine frames in general. Security Cylinder Lince32X32Mm C253232Lb Brass Long Cam With Knob Panic cylinder. Indicated for doors of pressure rooms, boilers, machine frames in general. Security Cylinder MCM Stainless Steel Long Cam With Knob European profile. Panic cylinder. Indicated for doors of pressure rooms, boilers, machine frames in general. T10P (TESA) T10P cylinders are equipped with the most advanced protection systems: spring-loaded pins. Features » Type of key: Flat, reversible and narrow neck. » 5 nickel silver keys per cylinder. » Number of rows: 2 » Pkt#; 6+5 » Combinatorial: Grade 6 » Corrosion and temperature resistance: Grade B » Anti-pick pins » Anti-bump system » Drill protection Options » Finishes: brass or nickel. » Cams: R15 and R13. » Masterkeying. Only extensions available » Possibility of matching and matching cylinders to a key number. master keying It is a planned locking system in which a key opens more than one cylinder, whether it has its own key or not. For offices, homes and companies of different sizes, master keying is the immediate solution that allows establishing access control, as well as reducing the number of keys to handle: security and comfort. It is convenient that the master keying is simplified to the maximum, since the more complex we will lose the possibility of carrying out later extensions.

Reparación, automatización y Mantenimiento de Puertas de Garaje. Adaptación de Normativas. Cambio de herrajes, cables de acero. Foto-células, Cuadros de Maniobra. Automation and Maintenance of all types of doors and closures. Sliding doors. Puerta corredera troquelada mixta Puerta correra puerta corredera puerta corredera. perfil puerta vertical puerta corredera perfil puerta vertical y chinchetas Puerta corredera + peatonal con tramex y perfil puerta vertical puerta_corredera_diseño_tablillas puerta_corredera_diseño_y_forja puerta corredera de dos hojas en msmo carril puerta corredera con tubos horizontales Puerta corredera curva articulada. Puerta corredera con tramex y perfil puerta vertical puerta corredera con perfil puerta vertical y salidida de humos puerta corredera con lama perfil puerta vertical color madera puerta corredera con cuarterones y lamas Z en horizontal. Puerta corredera con chapa troquelada Puerta_corredera_con_lamas_z_en_vertical_y_zócalo_inferior puerta corredera con chapa troquelada y fijos puerta corredera + peatonal independiente. Puerta corredera + peatonal con tramex y perfil puerta vertical Corredera_Klinic Corredera insdustrial paso a naves corredera con cuarterones y lamas Z automatismos_puertas_correderas Motors for sliding doors for entrance to farms, for entrance to community garages. We work with the best brands on the market. Clemsa, Erreca, Dea Sistem, Came, Aprimatic etc. For residential doors or heavy doors. Anti-crushing control, safety photocells, traffic lights, etc. For residential or intensive use. Silent and highly reliable motors. Speed regulation, opening and closing. Drives. PRICES. videos Swing doors. Puerta batiente una hoja + peatoonal. diseño de tablillas Puerta batiente perfiles metálicos Puerta batiente lisa de dos hojas Puerta batiente lamas horizontales + puerta peatonal Puerta batiente de una hoja. Puerta batiente de una hoja, tablillas horizontales puerta batiente de una hoja con lamas z y zocalo liso inferior Puerta batiente de una hoja con perfil z vertical y zócalo con cuarterones Puerta batiente de una hoja con chapa microperforada Puerta batiente de una hoja con lama z horizontal Puerta Batiente de dos hojas perfiles veticales Puerta batiente de dos hojas, perfil puerta ancho en vertical con chinchetas de adornos Puerta batiente de dos hojas diseño con perfil de cuadradillos Puerta batiente de dos hojas lisa color madera Puerta batiente de dos hojas con tubos en grados y zócalo inferior con chapa lisa Puerta batiente de dos hojas con módulos de chapa troquelada Puerta batiente de dos hojas con lamas z y zócalo liso inferior puerta batiente de dos hojas con modulos de chapa bandejas lisas (exterior) puerta batiente de dos hojas con modulos de chapa bandejas lisas (interior) Puerta batiente de dos hojas con diseño chapas entrelazadas Puerta batiente de dos hojas con chapa troquelada y puntas de lanza Puerta batiente de dos hojas con chapa troquelada y zocalo liso inferior Puerta batiente de dos hojas con chapa troquelada 20x20 The operators for swing doors can be of various models: Electromechanical arms, hydraulic, articulated arm or even pit. They are silent and reliable equipment with all the safety requirements in terms of their operation, with anti-crushing controls, power controls, reversal when closing, etc. They are used to activate folding doors or gates. They can also have a lock without the need for a lock in its closure or with an electric lock for greater reliability. Drives. PRICES - videos Swing Doors. Puerta basculante y peatonal ane Puerta basculante vista desde exterior Puerta basculante industrial con puerta peatonal Puerta basculante vista desde el interior Puerta basculante una hoja color madera Puerta_basculante_perfiles_metálicos_y_madera Puerta basculante entrada a garajes comunidatio Puerta basculante entrada a comunidad Puerta basculante de una hoja Puerta basculante de dos hojas a 13 acabada en madera Puerta basculante con tubos verticales de 20x20 Puerta basculante con tubos verticales de 20x20 y peatonal entrada a portal insertada Puerta basculante con malla electrosoldada Puerta basculante con puerta peatonal centrada Puerta basculante con cotrapesos Puerta basculante con chapa perfil puerta Puerta_basculante_chapa_perfil_puerta_con_ventización_superior Puerta basculante con chapa troquelada Puerta basculante con contrapesos Puerta basculante a 13 con salida de humos Puerta basculante chapa perfil puerta Puerta basculante acabada en madera y adornos de chinchetas Puerta basculante color blanca Puerta basculante y peatonal anexa The automations for overhead doors with two 1/3 articulated leaves are regularly used in community garage doors and for intensive use. They are usually heavy or large doors. These doors are normally provided with counterweights and steel or chain cables for their transmission and automation. The automatisms are usually fed at 220v., 380v., or direct current at 24v., these being the quietest and most economical equipment in terms of consumption. Depending on the control panel included in the installation, they can enable the door to operate in soft stop, anti-crushing control, as well as being able to incorporate accessories such as safety photocells, traffic lights, garage lighting, etc... Drives. PRICES Sectional doors. residencial cuarterones residencial acanalada lisa residencial acanalada puerta seccional vista desde el interior de garaje puerta seccional para entrada a garaje puerta seccional y de fondo batiente de dos hojas puerta seccional residencial puerta seccional de cuarterones puerta seccional con peatonal centrada Puerta saccional con registro salido de humos puerta seccional blaca acanalada lisa Automatización_de_puerta_seccional puerta seccional acanalada lisa color madera puerta seccional color madera Puerta seccional todo madera Puerta seccional marrón tabaco puerta seccional con tragaluces puertas-seccionales-industriales puestas seccionales industriales para naves Silent sectional doors in their manoeuvres, with adjustable brake in opening and closing travel, anti-crushing control inversion to maneuver due to unexpected obstacles. Very comfortable and very easy to maintain. Drives. PRICES - videos ROLLING CLOSURES Automation for roller shutters normally used in businesses to protect shop windows and access doors to premises, thus giving greater security in terms of vandalism or attempted theft. They are usually powerful and also facilitate the opening of the closures since these are sometimes heavy in terms of handling. The motors also usually have an electro-brake that blocks the maneuvers opening or closing if it is not electronically actuated with its transmitter command or pushbuttons. These equipment can also be used in residential garages . Drives. PRICES BARRIERS of bar or chain. Wide range of automatic barriers for residential, community use and industrial, as well as automatic barriers for vehicle access and control. Drives. PRICES - videos Garage door regulations.

Muelles para puertas de Portal, Oficinas y locales. Silenciosos, con freno incorporado. Freno retenedor Justor. Instalacion y ajustes. JMiG cerrajeros. 629107555. Door closer springs. ASSA ABLOY DC500. Door closer with Cam-Motion® technology and height-adjustable slide guide. Certified in accordance with EN 1154 It can be used for right-hand opening doors e left. It can be used in four types of installation: hinge face or opposite hinge, in standard installation o in the frame. Suitable for doors with protection against fire and smoke. Continuously adjustable spindle up to 14 mm. Closing speed, final closing speed and brake a la opening adjustable by means of regulating valves frontal. Infinitely adjustable closing force, size EN 1-4, for doors up to 1100 mm wide. Effective opening brake and adjustable speed range closing end Opening angle up to 170º Thermodynamic valves for consistent performance. Standard colors:_cc781905-5cde-3194-bb3b-cf156d5-bb3b silver EV1; white, similar to RAL9016; brown, similar to RAL8014; black, similar to RAL9005, stainless steel _cc781905-5cde-3194-bb3b_cf-158bad5.cf Features for sliding guide G195: Height adjustable by 2mm for tolerance, concealed fixing screws CT2000D Cierrapuertas compacto de guía deslizante para puerta estándar y RF. _cc781905-5cde-3194-bad5cf58d_ Features: Certified with UNE-EN 1154:1996 + A1:2003. Force 3: for doors of 95 cm. wide and 60 Kg. maximum weight. Supplied with sliding guide and ABS casing. Two separate valves for closing and latching speed control. Opening brake valve. Installation possibilities: normal and inverted. Finishes: BL, BR, NE, OR, PL CT1800 _cc781905- 5cde-3194-bb3b-136bad5cf58d_Multiforce door closer EN2-3-4 thanks to its system _cc781905- 5cde-3194-bb3b-136bad5cf58d_ install multiple_positions. _cc781905- 5cde-3194-bb3b-136bad5cf58d_ Certified with UNE-EN1154: 1996+ A1:2003. Ideal for doors _cc781905- 5cde-3194-bb3b-136bad5cf58d_ for medium-high traffic and for fire doors(RF) _cc781905- 5cde-3194-bb3b-136bad5cf58d_ Features: Funcionamiento smooth and effective, with its mechanism de piñón -hardened steel rack and helical spring acero especial con alto coeficiente de elasticidad y resistencia to fatigue. Strength: Installable in strength positions EN2-3 and 4. ( From 850mm and 40kgs to 1100mm 80kgs). Opening up to 180º in forces 2 and 3; up to 105º in force 4. Two independent valves for speed control of closing and final blow. Installation with extensible articulated arm. Finishes: White, black and silver. CT180034 classification with European standard. CT2500 _cc781905-5cde-3194-bb3b_cf58d_ The CT2500 is an articulated arm door closer that stands out for su gran versatility and modern design. _cc781905-5cde-3194-bad5cf58d_ Features: Certificate UNE-EN1154: 1996 + A1: 2003. Range of forces EN2 - EN4 in a single model. A single position of holes, for any force. Closing and final stroke speed regulation. Opening brake (only model CT250034). Reversible. Retention adjustable to any position, by interlocking system in the joint. Finishes: BL, NE, OR, PL. TS 72 The ideal solution for doors up to 1100 mm wide tested and approved to EN 1154 DORMA TS 72 is the multi-purpose door ideal - closer for all standard door designs and constructions. Without a back plate, it is particularly easy and quick to set up. The spring force can be individually adapted to the size of the door by means of an adjusting screw. Certified to ISO 9001. Automation for swing gate 714 SERIES Multistrength version.CISA 714 series door closers are manufactured in two sizes, and can be fixed to function with 5 different closing forces. The most suitable closing force (EN 2-3-4 or EN 4-5-6) can be fixed simply by adjusting the position of the arm. BTS 80 SYSTEM glass door pivot Universal floor brake that does not guard hand for doors of single and double action up to 300 kg. of maximum weight. Close from 175 fully hydraulically controlled and with retention device selectable between 75 and 105. Start of retention, closing delay and opening braking adjustable. Models available with forces EN 3,EN 4, EN 6. Approved according to EN 1154. Interchangeable turning axis of all types and lengths. Cover plates in stainless steel or polished brass. Automation for swing gate 602 SERIES The door closer can be installed on right or left handed doors and swings, simply using the corresponding hinges . Justor Retainer Brake. -Cushions the blow of the door. -Acts in the last 10° of closure. -Ensures the total closure of the door. -4 force models. Models: FR 0 - FR 0G FR 1 - FR 1G FR 2 - FR 2G FR 3 - FR 3G models and features. .

Automatización de puertas de garaje, barreras y cierres enrollables. Visita y asesoramiento sin cargos. Mantenimiento a comunidades, empresas y particulares. Access control on garage doors. Garage access control. High and low commands already recorded. Change of control codes and change of key in receiving card. Motors for garage doors and metal closures. Automation of garage doors, barriers and roller shutters. We work with the best brands in the market. Visit and advice without travel charges to offer you the best option for your garage door. Guarantee of all our products. Maintenance of garage doors to communities and individuals. Conditioning to Regulations. Motors for SWINGS Motors for SECTIONAL Motors for TIPPERS Motors for ROLLING SHUTTERS Motors for SLIDES BARRIERS

Cerradura eléctrica para puertas de portal y comunidades. Electro-cerraduras para Puertas de Garaje. Instalaciones y Reparaciones. JMiG cerrajeros. 629107555. Electric lock. Electric locks for all door models, both community doors, wooden doors or garage doors. yb-200-led YB-500C-LED Electrocerradrua con pulsador Electrocerradrua con pulsador ELECTROCERRADURA Viro de paletón ELECTROCERRADURA Viro de paletón Apertura con huella digital.Control Apertura con huella digital.Control de Acceso. Electrocerraduras para puertas de portal y de garaje. Electrocerraduras para puertas de portal y de garaje. CERRADURA OCULTA ELECTRICA CON LLAVE MANDO A DISTANCIA. Cerradura oculta. Se coloca por el interior de la puerta y por la parte exterior de la puerta no sale cerradura. IMPIDE QUE EL CACO LOCALICE SU SITUACIÓN. Apertura de la cerradura con llave - mando a distancia (como la de los coches). MUY SEGURA. BULON DE ACERO. cerradura con codigo para apertura cerradura con codigo para apertura. CONTROL DE ACCESO PERSONAL. Electric lock. I saw ELECTRIC LOCK WITH ADJUSTABLE ENTRY 50-60-70-80 mm.For swing doors.Great reliability, anti-opening with card. Impact and wind resistance. CISA electric lock Security locks for gates. The wide range of its models was designed and produced to satisfy every installation need and to compose the range of locks by CISA doors of the iron. Revolutionary locking system with rotating latch bolt offers: - high resistance to theft - significant resistance to vibrations and wind blows - resistance to lateral load at 2,000 kilograms, 6 times more than the performance of the best locks on the market to date. It is an electric lock that adapts to any type of door or gate in terms of style and size. Its developed design and essential lines offer an additional resource for architects' style research. Maximum flexibility. It can be applied to any type of door or gate without limits: Its reversible (left or right) variable entry from 50 to 80 mm is equipped with self-adjusting device for closure, vertically and horizontally. Electric lock KL 5001 L5001 ELECTRIC LOCK WITH BULB. Electric lock for gates and automated folding doors. Secure anchoring/closing. Wind blast resistant. with card anti-opening insurance. With key on the outside and inside Electric lock DX200I - Inverted operation. - Easy installation: - Armor with round edges, - Identical dimensions of the armor and the front plate, allowing that the two elements can be reversed if required, - Quick connection with terminal block, - Compact. - Free Voltage - Timer. - Monitored. - Attractive Price. - Anti-unblocking and anti-cut bolt with a diameter of 14mm. - Dry contact output (door and lock status). - Stainless steel frame and front plate with round edges. - Latch with symmetrical piston and armor. - Small lock dimensions. - Adjustable timer. - Optional: KDX200 surface mount aluminum profile. - Free Voltage: 12 to 24V dc. - Current consumption: - 200mA at 12Vdc, - 130mA at 24V dc. - Input current: - 1A at 12Vdc, - 600mA at 24V dc. Magnetic lock MEDIUM POLARIS Magnetic movement lock, especially suitable for doors modern design and essential lines. Unparalleled versatility thanks to the projection of innovative supports that can be used on flush doors and overlapping doors, with wooden or aluminum frames. Like all the locks in the Medium program, perfectly interchangeable with each other, it stands out for its extraordinary silence during closing; precision in the mechanical couplings, it transmits a pleasant sensation of fluidity of movements to the handle and the key. Automatic bit striker. The electric door opener is a device that is installed in the frame of the door to control its opening from a remote place through an electrical device. In an electronic door entry system it is possible to activate the door opener of the entrance to the building and allow the access of the visit from the telephone or home monitor by pressing the lock release \'key\' button. A door opener is made up of an electrical mechanism and a shield or a cover depending whether it is recessed or surface mounted. ACTIVATION 12VDC Reversible lock release with 101mm body for left and right doors. When served in the MAX version, the body becomes 90mm. They are recessed in wooden or metal frames. They include a REVERSIBLE UNIVERSAL Series mechanism and a (recessed) frame. They allow MAX version. YB-200-LED YB-500C-LED Electromechanical security lock with retention force 1000 Kg Closure for automations consisting of an electromagnet that controls the movement of a piston that allows the door to be locked or released. open door sign Characteristics of the Fail Safe electromechanical lock Electromechanical security door lock with recessed mounting. Closure for automations consisting of an electromagnet that controls the movement of a piston that allows the door to be locked or released. It works in Fail Safe (NC) mode, it is unlocked in the absence of current in the electromagnet, so it is suitable for use on doors that must comply with emergency exit regulations. It allows its installation on the surface of wooden, metal, glass, RF or fire doors. Safety self-closing with programmable delays of 0, 3, 6 and 9 seconds that ejects the bolt if the door does not open. It supports a maximum retention force of 1000 Kg. It can be activated through a simple button or through access control. Door status sensor with Relay NC output for connection to access control or automation. DC 12V operation. Tested 500,000 cycles. Made of high quality and resistance aluminum. Technical characteristics: Mounting: Embedded. Opening mode: Fail Safe (NC). Closing delay time: 0, 3, 6 and 9 seconds. Holding force: 1000 Kg. Output signal: Door status, NO / COM. Power: DC 12 Volts. Consumption at rest: 150 mA. Consumption in operation: 850 mA. Operating temperature: Between -40ºC and +30ºC. Plate dimensions: 95 (H) x 3 (W) x 30 (D) mm. Piston dimensions: 95 (H) x 3 (W) x 25 (Fo) mm. Weight: 600 grams. Fail Secure opening electromechanical lock 1000Kg retention. Electromechanical security lock with Fail Secure (NO) opening mode, a retention force of 1000 Kg. Door status sensor with programmable self-closing. Characteristics of the electromechanical security lock: Electromechanical safety lock with piston (bolt), with Euro cylinder with 4 keys included. Its opening mode is NO Normally Open (Fail Secure), which means that in the event of a power failure the door would remain closed. It also has a configurable delay between 0, 3, 6 or 9 seconds, open door signal, status LED and is applicable in fire protection systems. It is powered through 12 VDC. For mounting on wooden, metal, glass and RF doors. Technical characteristics: Mounting: Embedded. Opening mode: Fail Secure (NO). Closing delay time: 0, 3, 6 and 9 seconds. Holding force: 1000 Kg. Cylinder: Euro 37 x 37mm with eccentric cam. Power supply: DC 12 V / 960/180 mA start/standby. Opening sensor: indicator LED, door indicator output, integrated in socket. Entry profile: Narrow 23 mm. Plate dimensions: 42 (D) x 210 (H) x 25 (W) mm. Socket dimensions: 90 (D) x 3 (H) x 25 (W) mm. Weight: 1000g. Temperature: -40º C ~ +60º C.

Accionadores coaxiales para persianas y cierres enrollables, comerciales e industriales. Instalación con y sin bloqueo por electro-freno. 629 10 75 55. JMiG Automation for roller shutters. ROLE. Coaxial actuators for commercial and industrial rolling shutters. Great power and robustness. Product sheet. Technical manual. . ROC. Coaxial actuators for commercial and industrial rolling shutters. Counterbalanced blinds. Great power and robustness. Electronic Panels CLEVER For rolling doors CLEVER01: Basic panel for shutters with 24Vdc output Technical manual. . FIREWOOD. Tubular actuators for blinds Tubular actuators for commercial and industrial rolling shutters. Non counterbalanced doors Product file. Technical manual. Actuators for all types of domestic blinds. Simple assembly and easy installation. VOC3510/VOSR3510 SHUTTER TUBE DIAMETER 40 mm Max shutter height 1.5 m From 1.5 to 2.5 m From 2.5 to 3.5 m max weight blind 27 kg 24 kg 20 kg. LXC4520 BLIND TUBE DIAMETER 60 mm BLIND TUBE DIAMETER 70 mm Blind height Max 1.5 m From 1.5 to 2.5 m From 2.5 to 3.5 m Max 1.5 m From 1.5 to 2.5 m From 2.5 to 3.5 m. max weight blind 32 kg 30 kg 28 kg 30 kg 28 kg 26 kg LXSR4520 BLIND TUBE DIAMETER 60 mm BLIND TUBE DIAMETER 70 mm Blind height Max 1.5 m From 1.5 to 2.5 m From 2.5 to 3.5 m Max 1.5 m From 1.5 to 2.5 m From 2.5 to 3.5 m. max weight blind 26 kg 25 kg 24 kg 30 kg 28 kg 26 kg LXCM4550 /LXSR4550 SHUTTER TUBE DIAMETER 60 mm SHUTTER TUBE DIAMETER 70 mm SHUTTER TUBE DIAMETER 80 mm Blind height Max 1.5 m From 1.5 to 2.5 m From 2.5 to 3.5 m Max 1.5 m From 1.5 to 2.5 m From 2.5 to 3.5 m Max 1 .5m 1.5 to 2.5m 2.5 to 3.5m max weight roller shutter 110 kg 95 kg 78 kg 98 kg 85 kg 75 kg 90 kg 72 kg 63 kg 230Vac/230Vac,encoder Product sheet. Technical manual 1,023.76KB Technical Manual 812.90KB

Automatización y Mantenimiento de Puertas de Garaje. Contrato de Mantenimiento a comunidades. Adaptación de Normativa. control de acceso. 629107555. JMiG cerrajeros Door automation. *Automatización y reparación todas las marcas y modelos. *Acondicionamiento a normativa de seguridad. Puertas CORREDERAS Puertas BATIENTES BARRERAS Puertas SECCIONALES Y BASCULANTES. Puertas BASCULANTES de 2 hojas y contrapesos CUADROS DE CONTROL Motores con tecnología ‘brushless’ digital Cuadros de control ROGER BRUSHLESS Control Panels To play, press and hold the enter key. To stop, release the enter key. Security elements To play, press and hold the enter key. To stop, release the enter key. To play, press and hold the enter key. To stop, release the enter key.

Automatización y mantenimiento de puertas de Garaje. Cerraduras de seguridad. Apertura de puertas. Cerrajería en General. 629 107 555. cerrajero, cerrrajeros, motor puerta de garaje. puerta seccional, paracaidas, semáforos, tesa tk 100. bombillo de seguridad, bombillos, mantenimiento comunidades puertas de garaje. Legal warning JOSE MANUEL IBAÑEZ GONZALEZ - JMIG CERRAJEROS, provided with NIF / CIF 08793641M, address Cuesta Del Rey, 14, 28814 - Daganzo De Arriba (Madrid), cannot assume any responsibility derived from the incorrect, inappropriate or illegal use of the information that appears in the Internet pages of www.jmigcerrajeros.com Within the limits established by law, www.jmigcerrajeros.com does not assume any responsibility derived from the lack of veracity, integrity, updating and precision of the data or information contained in its Internet pages. The contents and information do not bind www.jmigcerrajeros.com nor do they constitute opinions, advice or legal advice of any kind, since it is merely a service offered for informational and informative purposes. The Internet pages of www.jmigcerrajeros.com may contain links (links) to other pages of third parties that www.jmigcerrajeros.com cannot control. Therefore, www.jmigcerrajeros.com cannot assume responsibility for the content that may appear on third-party pages. The texts, images, sounds, animations, software and other content included in this website are the exclusive property of www.jmigcerrajeros.com or its licensors. Any act of transmission, distribution, assignment, reproduction, storage or total or partial public communication must have the express consent of www.jmigcerrajeros.com . Likewise, to access some of the services that www.jmigcerrajeros.com offers through the website, you must provide some personal data. In compliance with the provisions of Regulation (EU) 2016/679 of the European Parliament and of the Council, of April 27, 2016, regarding the protection of natural persons with regard to the processing of personal data and the free movement of these data we inform you that, through the Completion of these forms, your personal data will be incorporated and will be processed in the files of JOSE MANUEL IBAÑEZ GONZALEZ - JMIG CERRAJEROS in order to be able to provide and offer our services as well as to inform you of improvements to the website. Likewise, we inform you of the possibility of exercising your rights of access, rectification, cancellation and opposition of your personal data, free of charge by email to jmigcerrajeros@outlook.com or at the address Cuesta Del Rey, 14, 28814 - Daganzo From Above (Madrid).

Cuadros de maniobras para puertas automáticas. Cuadros de control con sistema anti aplastamiento y paro suave. Centralita para regulación de semáforos. 629107555 Control panels for garage doors. To play, press and hold the enter key. To stop, release the enter key. To play, press and hold the enter key. To stop, release the enter key. LOOP DETECTORS For swing and swing doors ACCESSORIES / MAGNETIC LOOP DETECTOR L JDM: Magnetic loop detector at 230 Vac, 170x135x85 mm (1 or 2 loops) LBUC1: Magnetic loop detector at 230Vac, 80x40x79mm (1 loop) LBUC2: Magnetic loop detector at 230Vac, 80x40x79mm (2 loops) VIVO-M101: Panel for swing gates, 1 motor VIVO-M201: Panel for swing gates, 2 motors VIVO-D203: Frame for one or two BUL/TOPO/ARC engines VIVO-M203: Panel for one or two 220Vac motors with display VIVO-D103: Frame for IZAR actuator with limit switches VIVO-D102: Panel for IZAR actuator with encoder VIVO-T101: Three-phase panel with double photocell input VIVO-D201 ATTRIF BOX FOR THREE-PHASE ACTUATOR ATRIF-HP1 BOARD FOR THREE-PHASE ACTUATOR PRESENT MAN Control Panel CLAS 5 CLEMSA Universal, Intensive Use. SLIDE SWINGARM FOLDING 1 or 2 leaves. INTENSIVE use Power supply: 230-380 V AC. Maximum Power: 1500 W. BOXES FOR OVERHEAD DOORS AM606S PANEL WITH STOP SOFT FOR SINGLE-PHASE ACTUATOR To EPE-B/A EPEB-PAL A EPE-B: BOARD WITH ENCODER FOR ELECTROMECHANICAL ACTUATORS To EPEB-PAL: PANEL WITH ENCODER WITH ALTERNATIVE STOP LIVE-D103 DIRECT CURRENT PANEL FOR 24Vdc ELECTROMECHANICAL ACTUATORS LIVE-M101 UNIVERSAL PANEL WITH SOFT STOP FOR HYDRAULIC ACTUATORS LIVE-M201 UNIVERSAL PANEL WITH SOFT STOP PARA TWO ACTUATORS LIVE-D201 PANEL FOR ONE OR TWO BUL/TOPO/ARC ENGINES PICTURES FOR SLIDING DOORS AP400S SOFT STOP PLATE FOR PUMA ACTUATOR ATTRIF BOX FOR THREE-PHASE ACTUATOR AP600S SOFT STOP PLATE FOR RINO ACTUATORS LIVE-M101 UNIVERSAL PANEL WITH SOFT STOP FOR HYDRAULIC ACTUATORS LIVE-M201 UNIVERSAL PANEL WITH SOFT STOP PARA TWO ACTUATORS PICTURES FOR SLIDING DOORS clever. erreka clemsa control panel. with cr-81 receiver for mutancode clemsa. class-10 control box class 1 for roller shutter Cuadros de control BRUSHLESS ROGER AG/CTRL tarjeta electrónica para barreras AGILIK 4 y 6 Tarjeta electrónica ROGER AG/CTRL para barreras automáticas AGILIK,el motor ROGER brushless para barreras electromecánicas. ROGER B70 1DC tarjeta electrónica para puertas correderas de 600 a 1000 kg Tarjeta electrónica ROGER B70 1DC para puertas correderas de entre 600 y 1000 kg de peso. B70/2B/BOX Cuadro de control digital para dos motores brushless basculantes. B70/1B. Para puertas basculantes Tarjeta electrónica ROGER B70/1B para puertas basculantes, ROGER B70 1R cuadro de maniobras preleva ROGER B70 1R cuadro de maniobras para puertas basculantes CONTRAPESADAS. Para motores brushless Roger BR42/630 con funcionamiento mediante topes y encoder, sin finales de carrera. 24v.cc. B70/2ML Cuadro de control digital ROGER para cancelas batientes con motores brushless. B70/2B/BOX Digital controller 36V para 2 motores BRUSHLESS, B70 1DCHP Tarjeta electrónica ROGER B70 1 DCHP para puertas correderas de entre 1600 y 2200 kg de peso. B70/2DC Tarjeta electrónica ROGER B70 2DC Roger para puertas automáticas batientes o abatibles de una o dos hojas. EDGE 1 36V. Tarjeta electrónica ROGER EDGE 1 de 36V Para 1 o 2 motores Brushless Roger de 36 V en puertas automáticas batientes o abatibles de gran tamaño o peso.